Logic Manufacturing

Hanging Basket Watering System SLB610HB

A bowser provides a quick and easy way to get fresh water to the location of your choice. This model is designed to allow quick and easy watering of hanging baskets and is equally efficient when watering flower beds and other planted areas. This self-contained 600litre trailed unit with its own engine driven pump offers total flexibility as it can be towed by any vehicle with a towbar, rather than having to be towed by a tractor and powered by its PTO (power take off).

The flexibility of a simple, manual hose reel with 15m of hose allows the operator to  walk between watering areas. A 1"(25mm) self-fill hose gives the option of collecting water from a natural source eg. lake, stream, etc.

This is part of a range of bowsers which Logic offers - for other similar models, see the following:

SLB400 - 270litre trailed gravity feed bowser

SLB620/H/HM - 600litre gravity feed/engine bowser range  

 

 

SLB620 - the 600litre bowser range starts with as a gravity feed bowser

SLB620H - if required you can specify an engine/pump which discharges the contents into elevated tanks or troughs. With a powered pump there is also an option of a suction hose kit  which allows you to "self-fill" the bowser from any available fresh water source. 

SLB620HM - this option is the same as above with the addition of a menage watering kit,  ideal for ‘damping down’ arenas when it gets hot and dusty in the summer months.

 

Why do I need one?

To easily transport fresh water to where it is required.

 

Where do I use it?

Paddocks, yards - anywhere you need water transporting to!

 

How does it work?

At its most basic there is a 600 litre tank on a trailed chassis with a large diameter ventilated lid at the top to enable easy filling. Attached to the sump is a 3.5m long pipe, 2" diameter, with a 1/4 turn outlet tap.  

 

SLB620 - the 600litre bowser range starts with as a gravity feed bowser

SLB620H - if required you can specify an engine/pump which discharges the contents into elevated tanks or troughs. With a powered pump there is also an option of a suction hose kit  which allows you to "self-fill" the bowser from any available fresh water source. 

SLB620HM - this option is the same as above with the addition of a menage watering kit,  ideal for ‘damping down’ arenas when it gets hot and dusty in the summer months.

 

Why do I need one?

To easily transport fresh water to where it is required.

 

Where do I use it?

Paddocks, yards - anywhere you need water transporting to!

 

How does it work?

At its most basic there is a 600 litre tank on a trailed chassis with a large diameter ventilated lid at the top to enable easy filling. Attached to the sump is a 3.5m long pipe, 2" diameter, with a 1/4 turn outlet tap.