The Logic System 40 chassis provides operators with a low ground pressure option for their tractor-sized equipment. Existing spreaders and sprayers are simply bolted on the unique cross-member of this universal chassis. Adjustable height and wheel track ensures the machinery operates at the correct settings. The top link of the three-point linkage on the implement is attached to the A-frame support on the System 40 chassis. Implements which normally require attachment to a PTO gain their power from the 5.5 hp engine (reverse drive with centrifugal clutch option available), to which the PTO shaft is connected. The equipment is securely supported with the weight directly over the axle for maximum stability - particularly important where heavy/liquid loads are involved. Kits are available to allow remote control of the implement. The tandem axle version provides additional stability and low ground pressure. Equipment can be quickly remounted for tractor use in just a few minutes.
System 40 allows the operator to get onto the land early in the season, when conditions would be far too soft for a tractor or if a tractor is not available. The offsettable draw bar option, combined with the System 40 adjustable wheel track enables the equipment to take advantage of existing tramlines and together with the low ground pressure of the equipment, this ensures the ground is not significantly damaged by the equipment.
The System 40 chassis is a simple idea, superbly executed. The standard unit has an adjustable axle track width, adjustable equipment platform height, a raise/lower handle and flotation wheels and a 5.5hp engine with PTO type interface. If reverse drive is required (necessary for some models of equipment) this can be specified upon ordering. Should additional equipment cross-members be required, these are available, as is an equipment lifter for additional ease when transferring equipment.
We try to be helpful here at Logic, and have wide experience in tasks of this sort.
To place an order or contact us, please use the details below and we will carefully attend to your requirements, as well as answering any questions you may have.
We will arrange for your local Logic dealer to complete the transaction, sort out the paperwork and arrange delivery. That dealer will also be a good local contact for your ongoing support and back-up, should spares or servicing be required.