The THT400 is a trailer designed to be used with an ATV/UTV to extract cut lengths of timber from the point of felling to a suitable forward area. The standard construction features immensely strong timber retaining bolsters and the low ground pressure wheels on the pivoting tandem axle beam allow for easy travelling over difficult ground. Stabilty is incredible over rough terrain and areas with short tree stumps that need to be traversed. A 360 degree swivel tow hitch and bead lock wheel rims come as standard for extra safety. The headboard can be moved backwards and forwards to accommodate different timber lengths.
The THT400 is very useful for anyone who needs to extract timber, particularly where access is restricted (e.g. thinning operations) and where the use of low ground pressure equipment would be beneficial, utilising the ATV or UTV to its full potential. Timber can be extracted easily and efficiently with minimum expense. This trailer can also be used sucessfully for fencing operations where access is difficult and where conventional methods are not practical.
The THT200 is a trailer designed to be used with an ATV/UTV to extract long lengths of timber from areas with limited access or from areas that may be inaccesible by other vehicles. Ground damage is kept to a minimum as both ATV/UTV and the THT200 have excellent low ground pressure properties.
The leading end of the timber is lifted up using the winch cable and is then lowered into the ‘U’ shaped cradle which features teeth that grip the load. The timber is then secured using the strap supplied. The cradle sits on a turntable which means the whole unit is very manoeuvrable as this allows the trailer to turn independently of the load. This feature avoids situations where the trailing load would otherwise cause the trailer to tip over on cornering tightly.
The ‘U’ shaped cradle features swing-down legs that are used to assist unloading – simply remove the securing strap, withdraw the locking pin and drive away.
The hand winch is used to facilitate the extraction of the timber to the trailer from restricted areas. The trailer also comes with a 50mm swivel tow hitch and bead lock wheel rims with 22×11-8 flotation tyres for good low ground pressure and extra safety.
The THT200 is very useful for anyone who needs to extract timber, particularly where low ground pressure is an advantage. Timber can be extracted easily and efficiently with minimum expense.
The DST is a flat bed trailer with the wheels situated underneath and therefore designed to give a large load area (1970 x 1400mm). The standard unit comes with has a 300mm head board and ladder rack only, but can be specified with a drop-side kit which gives 300mm sides and tailgate. It benefits from very strong, all welded construction and has a fully hot-dip galvanised body. The standard construction features a robust, high quality timber floor which provides good grip for anything in the trailer although there is an option of an alloy treadplate floor if required. Swivel tow hitches and bead lock wheel rims come as standard for extra safety. A road legal version is available.
The STT is a general purpose off-road trailer. It is a versatile asset and quickly becomes an almost indispensable tool. The standard unit has low sides for easy loading and unloading. It benefits from a very strong, all welded construction and has a fully hot-dip galvanised body. The standard construction features a strong, high quality timber floor which provides good grip for objects in the trailer although there is an option of an alloy treadplate floor if required.