Salt Spreader PDS150T

When it comes to spreading de-icing products including wet rock salt, Logic has the answer. The range of GDS and PDS Salt Spreaders have proved to be an invaluable winter maintenance tool for many industry and municipal sectors. Features include a unique agitation system and moving-floor conveyor similar to highway sized salt spreaders, to convey salt to the spinning disc. Through this specific design for the UK market which primarily uses road/rock salt, it provides a reliable and efficient method of application and it works.

The PDS150T is hydraulically driven and sized to fit onto the three point linkage of small and compact tractors. Its design provides a low filling height, a low centre of gravity and even distribution of weight throughout the spreading process which is important for vehicle stability.

NOTE: Minimum flow rate 25l/min.

PDS150D – Engine driven demount models also available.

Salt Spreader PDS354D

The Logic PDS (power drive spreader) Salt Spreader range has all the same design features and benefits as the GDS range but with additional features as follows:

An onboard 5.5hp petrol engine – this unit drives the rolling floor and gear box to the spreader disc.

An option of either a (high-speed) braked, fully suspended trailer unit or de-mount unit to fit into 4×4 pick-ups, flat bed transits, trailer, etc. These two options allow high speed travelling between sites (up to 60mph – normal road speeds), so are ideal for contractor use or for use by organisations who need to cover multiple sites in one gritting or salt spreading session.

Either unit has a 585 litres capacity (675-750kg depending on moisure content) of road/rock salt. It is very quick to deploy at the first signs of bad weather and for winter gritting jobs it dramatically reduces the time needed to complete the task, when compared to the manual alternative of spreading salt or grit using shovels.

For more detailed design features, please see the GDS 200/250 salt spreader section.

LDS 120 Salt spreader

Spreader Range LDS

The Logic LDS120DS Salt Spreader is used to spread dry salt in winter conditions. Unlike our GDS and PDS salt spreaders, this unit is not suitable for spreading rock salt and must be used with dry free flowing, bagged salt only.

It is a much simpler machine designed for when a GDS or a PDS machine cannot be justified. The LDS120DS is a robust machine with either plastic or galvanised major components and has a capacity of 120 litres.

The LDS120DS will spread salt to between 8 and 12 metres, making it ideal for smaller premises which still need to maintain their roadways and car parks but cannot justify the expense of the larger, professional models.

Salt Spreader PDS354RB

The Logic PDS (power drive spreader) Salt Spreader range has all the same design features and benefits as the GDS range but with additional features as follows:

An onboard 5.5hp petrol engine – this unit drives the rolling floor and gear box to the spreader disc.

An option of either a (high-speed) braked, fully suspended trailer unit or de-mount unit to fit into 4×4 pick-ups, flat bed transits, trailer, etc. These two options allow high speed travelling between sites (up to 60mph – normal road speeds), so are ideal for contractor use or for use by organisations who need to cover multiple sites in one gritting or salt spreading session.

Either unit has a 585 litres capacity (675-750kg depending on moisure content) of road/rock salt. It is very quick to deploy at the first signs of bad weather and for winter gritting jobs it dramatically reduces the time needed to complete the task, when compared to the manual alternative of spreading salt or grit using shovels.

For more detailed design features, please see the GDS 200/250 salt spreader section.

Salt Spreader PDS150D

When it comes to spreading de-icing products including wet rock salt, Logic has the answer. The range of GDS and PDS Salt Spreaders have proved to be an invaluable winter maintenance tool for many industry and municipal sectors. Features include a unique agitation system and moving-floor conveyor similar to highway sized salt spreaders, to convey salt to the spinning disc. Through this specific design for the UK market which primarily uses road/rock salt, it provides a reliable and efficient method of application and it works.

The PDS150D is sized to fit onto the rear carrying platforms of UTVs. Its design provides a low filling height, a low centre of gravity and even distribution of weight throughout the spreading process which is important for vehicle stability. Mounting is enhanced by rubber pads under the chassis and integral ring mounts for tie down straps.

PDS150F – Hydraulically driven Fork Lift / tele-handler models also available.

Salt Spreader PDS150F

When it comes to spreading de-icing products including wet rock salt, Logic has the answer. The range of GDS and PDS Salt Spreaders have proved to be an invaluable winter maintenance tool for many industry and municipal sectors. Features include a unique agitation system and moving-floor conveyor similar to highway sized salt spreaders, to convey salt to the spinning disc. Through this specific design for the UK market which primarily uses road/rock salt, it provides a reliable and efficient method of application and it works.

The PDS150F is hydraulically driven and sized to fit onto the tines of a fork lift or telehandler. Its design provides a low filling height, a low centre of gravity and even distribution of weight throughout the spreading process which is important for vehicle stability. Mounting is via fork tine channels and the unit is secured with pins behind the tine uprights.

NOTE: Fork lifts must have suitable auxilary hydraulics for machine to work. Minimum flow rate 25l/min.

PDS150D – Engine driven demount models also available.

Studded Snowchains ATVXXX

studded-snowchains-atvxxx

These chains provide a huge increase in traction especially in snow or wet, muddy conditions and when tyres are part worn.

12v De-Icing Spreader (300L) EBC-TS300PP

12v De-Icing Spreader (300L) EBC-TS300PP

Spreading units of this type are ideal for specialist free-flowing de-icing products, in sensitive areas where Rock Salt would be too corrosive or where no messy residue is important, like hospitals, shops, airports, schools and railway stations etc.

These products are usually fully biodegradeable and are not harmful to humans, animals or vegetation. They are more effective than Rock Salt at lower temperatures, even down to -20* C in some cases.

The EBC-TS300PP is sized to fit a UTV, Side by Side, Pick up, or trailer towed by any suitable vehicle, where there is a significant area to cover, but using an every-day vehicle as the means of travel.

De-icing Spreader Range

This spreading unit has an un-laden weight of 70kg, sits on rubber pads and can be quickly secured using 4 tie down points, or if preferred, bolted down for permanent use. The overall dimensions are 950mm wide x 1020mm long x 880mm high and the stainless steel hopper has a capacity of 300lt.

The EBC-TS range of spreaders are designed to broadcast free flowing de-icing products. Each unit features stainless steel metering unit and corrosive resistant fixings. All these components are designed to achieve good performance over a long life.

The control box allows control of the feed and disc speed which dictates spread width, which is useful when moving from footpaths to roadways.

The metering plate bias adjustment permits spread patterns to one side or the other. The spreading disc has 4 vanes rather than 3, with more vane height than average spreading discs to prevent build up of material on the disc.

These spreading units can be used to either protect surfaces prior to expected frosts, or remove existing frost deposits, simply by adjusting the application rate.

For similar products see EBC-TS85PP and EBC-TS130PP.

Speak to a Logic dealer or see our retail price list for all options.

12v De-Icing Spreader (130L) EBC-TS130PP

12v De-Icing Spreader (130L) EBC-TS130PP

Spreading units of this type are ideal for specialist free-flowing de-icing products, in sensitive areas where Rock Salt would be too corrosive or where no messy residue is important, like hospitals, shops, airports, schools and railway stations etc.

These products are usually fully biodegradeable and are not harmful to humans, animals or vegetation. They are more effective than Rock Salt at lower temperatures, even down to -20* C in some cases.

The EBC-TS130PP is sized to fit a UTV, Side by Side, Pick up, or Compact tractor type vehicle, where there is a significant area to cover, but using an every-day vehicle as the means of travel.

De-icing  Spreader Range

The EBC-TS range of spreaders are designed to broadcast free flowing de-icing products. Each unit features a strong all-welded galvanised frame, polyethylene hopper, stainless steel metering unit and corrosive resistant fixings. All these components are designed to achieve good performance over a long life.

The control box allows control of the feed and disc speed which dictates spread width, which is useful when moving from footpaths to roadways.

The metering plate bias adjustment permits spread patterns to one side or the other and the mounting frame not only simplifies the attachment to the carrying vehicle, it allows tilting of the unit to affect the spread width and keep the base plate free of dust build-up which is important for component protection.

The spreading disc has 4 vanes rather than 3, with more vane height than average spreading discs to prevent build up of material on the disc.

These spreading units can be used to either protect surfaces prior to expected frosts, or remove existing frost deposits, simply by adjusting the application rate.

For similar products see EBC-TS85PP and EBC-TS300PP.

Speak to a Logic dealer or see our retail price list for all options.

12v De-Icing Spreader (85L) EBC-TS85PP

12v De-Icing Spreader (85L) EBC-TS85PP

The EBC-TS range of spreaders are designed to broadcast free flowing de-icing products. Each unit features a strong all-welded galvanised frame, polyethylene hopper, stainless steel metering unit and corrosive resistant fixings. All these components are designed to achieve good performance over a long life.

The control box allows control of the feed and disc speed which dictates spread width, which is useful when moving from footpaths to roadways.

The metering plate bias adjustment permits spread patterns to one side or the other and the mounting frame not only simplifies the attachment to the carrying vehicle, it allows tilting of the unit to affect the spread width and keep the base plate free of dust build-up which is important for component protection.

The spreading disc has 4 vanes rather than 3, with more height than average spreaders to prevent build up of material on the disc.

These spreading units can be used to either protect surfaces prior to expected frosts, or remove existing frost deposits, simply by adjusting the application rate.

For similar products see EBC-TS130PP and EBC-TS300PP

Speak to a Logic dealer or see our retail price list for all options.

UTV Snow Plough UTS201

UTV Snow Plough UTS201

Professional snow plough designed to be used by UTVs fitted with a System20 front mounting system. Very capable snow clearance implement capable of high work rates. 12v ram provides electric lift for convenient control from the cab of the UTV. All wiring and control box provided.

This is the UTV version of the S228 quick-attach snow plough. The extra width and power of a UTV means that the blade can be wider than ATV snow ploughs and this unit is 1.8m. In addition, because UTVs have a cab with windscreen, the simple, manual lift lever found on our ATV snowploughs is not desirable and operators benefit from the convenience and speed of in-cab 12v electric raise and lower facility. The UTS201 is a very competent performer when it comes to clearing snow up to 30 cm in depth. The UTS201 also benefits from a clever ‘break back’ system: if the blade should hit a hidden obstacle under the snow (for example, a raised manhole cover) the blade snaps forward, releasing the bottom edge from whatever it has caught on. The spring mechanism then snaps the blade back into operation so you can continue to clear snow without dismounting to reset the unit.

Attached to the UTV using Logic’s System 20 chassis, the snowplough can be angled to the left or right to clear snow in either direction. It is lifted in and out of work using a very simple but effective manual lift lever which operates an over-centre cam. The System 20 chassis must be fitted to the UTV but once done this does not compromise the operation of the vehicle in any way. When the snowplough (or any other System 20 implement) is needed it is attached in seconds using two pins and clips. This makes it a very quick and easy method of carrying out snow clearance tasks whenever it is needed. To extend the life of the snow plough, the rubber wearing strip along the bottom of the blade is replaceable.

ATV Snow Plough S228

ATV Snow Plough S228

This is the ‘professional’ version of the S221 quick-attach ATV snow plough. In common with the S221 it is a very competent performer when it comes to clearing snow up to 30 cm in depth. The S228 benefits from a clever ‘break back’ system: if the blade should hit a hidden obstacle under the snow (for example, a raised manhole cover) the blade snaps forward, releasing the bottom edge from whatever it has caught on to. The spring mechanism then snaps the blade back into operation so you can continue to clear snow without dismounting to reset the unit.

Attached to the ATV using Logic’s System 20 chassis, it can be angled to the left or right to clear snow in either direction. It is lifted in and out of work using a very simple but effective manual lift lever which operates an over-centre cam. The System 20 chassis must be fitted to the ATV but once done this does not compromise the operation of the vehicle in any way. When the snowplough (or any other System 20 implement) is needed it is attached in seconds using pins and clips. This makes it a very quick and easy method of carrying out snow clearance tasks whenever it is needed. To extend the life of the ATV snow plough, the rubber wearing strip along the bottom of the blade is replaceable.