System 40 universal chassis for UTV and ATV

The Logic System 40 chassis provides farmers with a low ground pressure option for their tractor-sized equipment.

System 40 universal chassis

View all

Sprayers

The Logic System 40 chassis provides landowners/contractors with a low ground pressure option for their tractor-sized equipment. Existing spreaders and sprayers are simply bolted on the unique cross-member of this universal chassis.

Adjustable height and wheel track ensures the machinery operates at the correct settings. The top link of the three-point linkage on the implement is attached to the A-frame support on the System 40 chassis. Implements which normally require attachment to a PTO gain their power from the 5.5 hp engine (reverse drive with centrifugal clutch option available), to which the PTO shaft is connected.

The equipment is securely supported with the weight directly over the axle for maximum stability – particularly important where heavy/liquid loads are involved. Kits are available to allow remote control of the implement. The tandem axle version provides additional stability and low ground pressure. Equipment can be quickly remounted for tractor use in just a few minutes.

The System 40 chassis is a simple idea, superbly executed. The standard unit has an adjustable axle track width, adjustable equipment platform height, a raise/lower handle and flotation wheels and a 5.5hp engine with PTO type interface. If reverse drive is required (necessary for some models of equipment) this can be specified upon ordering.  Should additional equipment cross-members be required, these are available, as is an equipment lifter for additional ease when transferring equipment.

Standard Features

  • Universal trailed chassis
  • Allows low ground pressure use of existing tractor-mounted equipment
  • Adjustable track
  • Adjustable height
  • Raise/lower control handle
  • 25×10-12 flotation wheels
  • Standard drive 5.5 hp engine
  • Centrifugal clutch reverse-drive engine variant available

Options

  • Single-axle version (25x10x12 flotation wheels)
  • Tandem axle option (22x11x8 flotation wheels)
  • Additional implement cross-members
  • Equipment lifter to facilitate loading onto System 40 chassis

Applications

  • System 40 allows landowners/contractors to get onto the land early in the season or when conditions would be far too soft for a tractor. For spreading or spraying, timing can be critical to make the most out of the crop – the System 40 makes the most out of an existing ATV/UTV. The System 40 adjustable wheel track enables the equipment to take advantage of existing tramlines and together with the low ground pressure of the equipment, this ensures crops are not significantly damaged by the equipment.

  • Contact us about the above

    Please contact us using the simple form below if you would like us to contact you about the...
    Thank you! Your submission has been received!
    Oops! Something went wrong while submitting the form.